Description
VW Amarok (2016–2022) — Bash Plate Set — Engine, Transmission & Lower Control Arms
Extended Underbody Protection: Engine, Transmission & Lower Control Arms Bash Plates
Combined Weight: 41 kg
The original VW Amarok earned a devoted following in Australia for its refined on-road manners and surprising off-road capability. But Volkswagen's European engineering philosophy prioritised comfort over underbody armour, leaving the engine, transmission, and suspension components dangerously exposed on unsealed roads. This RIVAL 4x4 Set of 3 Bash Plates fills that gap with precision-fit protection for the engine, transmission, and lower control arms — the components most likely to sustain damage on the gravel roads, station tracks, and rocky trails that Amarok owners frequently encounter. The bundle pricing delivers savings over purchasing each plate separately.
✓ Complete Underbody Protection
- ✓ 3-Plate Engine, Transmission & Suspension Protection
- ✓ High-Strength Aluminium Construction
- ✓ Precision Fit for VW Amarok
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle
What's Protected
- Engine Bash Plate — The Amarok's engine sump sits low and exposed beneath the vehicle, with virtually no factory protection. Whether you're running the V6 TDI or the four-cylinder, a rock strike to the oil pan results in rapid oil loss and potential engine seizure — an exceptionally expensive repair on any Volkswagen. This plate provides comprehensive coverage to the engine's most vulnerable section.
- Transmission Bash Plate — The Amarok's 8-speed automatic gearbox is a sophisticated piece of engineering housed in a thin aluminium casing. It's not designed to handle trail impacts, and damage to the transmission housing causes fluid loss and total drivetrain failure. This plate ensures the gearbox stays protected on every road surface.
- Lower Control Arms Bash Plate — The Amarok's independent front suspension uses lower control arms that are exposed to side impacts from rocks, logs, and ruts. A bent or damaged control arm destroys wheel alignment, causes uneven tyre wear, and compromises steering precision. These plates guard the arms from lateral trail debris.
Key Features
- Material: High-strength aluminium alloy
- Thickness: 6mm
- Combined Weight: 41 kg
- Finish: Textured matte black powder coat
- Mounting: Direct bolt-on to factory mounting points
- Number of Plates: 3 (Engine + Transmission + Lower Control Arms)
- Fitment: VW Amarok (2016–2022)
Why Choose Aluminium Over Steel?
- Weight Management: At 41 kg for three plates, aluminium keeps the Amarok within its GVM limits while providing comprehensive coverage — important for a vehicle often loaded with touring gear.
- Corrosion Resistance: Aluminium naturally resists rust, making it the ideal material for Amaroks that tackle water crossings, coastal tracks, and tropical environments.
- Energy Distribution: Aluminium's controlled flex absorbs impact energy across the plate surface, protecting the Amarok's independent suspension mounting points from concentrated force.
- Engineering Match: 6mm aluminium alloy matches the Amarok's own lightweight engineering philosophy — sophisticated, efficient, and effective.
What's Included
- ✓ 1x Engine Bash Plate
- ✓ 1x Transmission Bash Plate
- ✓ 1x Lower Control Arms Bash Plate
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ All Necessary Bolts & Fasteners
- ✓ Installation Instructions
Installation
- Difficulty: Easy to Moderate — suitable for home mechanics
- Requirements: Basic hand tools, vehicle ramps or jack stands
- Bolt-On Design: All three plates bolt to factory mounting points — no drilling, cutting, or permanent modifications
- Recommendation: Install the complete set in one session — allow approximately 1.5–2 hours
Built for Australian Conditions
Amarok owners in Australia use their utes for everything from weekend wine-country touring to serious outback expeditions. The terrain varies wildly — from the sharp basalt rocks of the Western District to the corrugated red roads of the Pilbara, from the sandy tracks of Coffin Bay to the slate-shelf creek crossings of the Grampians. RIVAL 4x4 bash plates are engineered for all of it. The powder coat finish handles salt air, tropical humidity, and endless dust without deterioration, while the ventilated design maintains healthy component temperatures during slow-speed off-road work.
Perfect For
- Touring & Overlanding: Engine, gearbox, and suspension protection for extended trips across Australia
- Coastal Driving: Corrosion-proof aluminium handles beach access and salt-air conditions
- Tradies & Fleet Use: Essential armour for Amaroks working on farms, sites, and rural roads
- Off-Road Enthusiasts: Rocky trails, creek crossings, and rutted tracks with full confidence
- Daily Commute: Protection from road debris, gutters, and speed bumps
Compatibility
Precision-engineered for:
- Volkswagen Amarok (2016–2022) — Core, Sportline, Highline, Canyon, Aventura, W580
- 3.0L V6 TDI Turbo Diesel
- 2.0L TDI Turbo Diesel (4-cylinder)
- 8-Speed Automatic Transmission, 4MOTION 4WD
Why RIVAL 4x4?
- Australian-Based Operations & Support: Local team with genuine understanding of Australian driving conditions
- Globally Engineered. Locally Proven: Precision design validated on Australian roads and trails
- High-Strength Aluminium Construction: Premium alloy delivering protection at a sensible weight
- Fast Australia-Wide Dispatch: Quick shipping from our Australian warehouse to your door
- National Dealer & Installation Network: Professional fitting through our authorised installer network
German Engineering Meets Australian Armour
Three plates protecting the engine, gearbox, and suspension your Amarok depends on. Protect it properly. Order now!
