Description
Toyota Land Cruiser 250 (2024–Present) Bash Plate Set – Engine, Transmission, Transfer Case & Fuel Tank
Four-Plate Underbody Armour: Drivetrain & Fuel System Protection
Combined Weight: 43.3 kg
Toyota’s Land Cruiser 250 is already a formidable machine straight from the factory, but Australia’s unforgiving terrain has a way of exposing every gap in underbody protection. This RIVAL 4x4 four-piece bash plate set seals those gaps with precision-fit aluminium armour spanning from engine to fuel tank. If you’re planning the big lap, running supplies to a remote cattle station, or simply exploring the tracks less travelled, this set ensures four of your most expensive-to-repair components stay protected kilometre after kilometre.
- ✓ Complete Underbody Protection — 4 Critical Components Covered
- ✓ High-Strength Aluminium Construction
- ✓ Precision Fit for Toyota Land Cruiser 250 (2024+)
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle — Save vs Buying Individually
What's Protected
- Engine Bash Plate — The LC250’s engine sump and lower block are the first line of vulnerability on rocky terrain. Impacts here risk oil loss, overheating, and catastrophic engine seizure. This plate delivers full-coverage protection across the engine’s exposed underside, turning potential trip-enders into glancing blows.
- Transmission Bash Plate — The automatic transmission’s housing is exposed to every rock and rut that passes beneath the vehicle. A cracked casing leads to fluid loss and inevitable gearbox failure. This plate ensures the transmission stays intact through creek beds, rock shelves, and corrugated tracks.
- Transfer Case Bash Plate — Without the transfer case, your Land Cruiser loses its 4WD capability and low-range gearing — the very features that make it a Land Cruiser. This plate shields the transfer case from direct impacts, preserving your ability to engage four-wheel drive when conditions demand it.
- Fuel Tank Bash Plate — A ruptured fuel tank isn’t just inconvenient — it’s dangerous. Leaking fuel creates fire risk and eliminates your ability to drive out of remote areas. This plate provides a solid aluminium barrier between your fuel tank and the rocks below, protecting both safety and range.
Key Features
- Material: High-strength aluminium alloy
- Thickness: 6mm
- Combined Weight: 43.3 kg
- Finish: Textured matte black powder coat — corrosion and UV resistant
- Mounting: Direct bolt-on to factory mounting points
- Number of Plates: 4 (Engine + Transmission + Transfer Case + Fuel Tank)
- Fitment: Toyota Land Cruiser 250 (2024–Present) — all variants
Why Choose Aluminium Over Steel?
- Weight Savings: Four aluminium plates at 43.3 kg combined weigh substantially less than steel equivalents, preserving critical payload for touring gear, water, and recovery equipment.
- Corrosion Resistance: Aluminium won’t rust through after repeated creek crossings, beach runs, or exposure to tropical and coastal moisture.
- Energy Management: Aluminium’s ability to flex and absorb impact energy protects both the plate and the chassis mounting points beneath.
- Modern Vehicle Design: The LC250’s TNGA-F platform is engineered with weight-sensitive targets — aluminium bash plates work within those parameters.
What's Included
- ✓ 1x Engine Bash Plate
- ✓ 1x Transmission Bash Plate
- ✓ 1x Transfer Case Bash Plate
- ✓ 1x Fuel Tank Bash Plate
- ✓ Complete Mounting Hardware & Fasteners
- ✓ Fitting Instructions
Installation
- Difficulty: Moderate — achievable for confident home mechanics with appropriate tools
- Requirements: Metric socket set, jack and axle stands or vehicle hoist
- Bolt-On Design: All four plates mount to factory points — no drilling, cutting, or permanent modifications
- Recommendation: Install the full set in one session for seamless front-to-rear coverage and minimal workshop visits
Built for Australian Conditions
Australia is the ultimate proving ground for underbody protection. The jagged dolomite of the Kimberley, volcanic rock along the Great Ocean Road’s hinterland, buried ironstone across the Pilbara, and flooded creek crossings through the Daintree — the terrain here is purpose-built for punishing unprotected vehicles. RIVAL 4x4 bash plates are engineered with these conditions at the core of every design decision, delivering protection that lasts through years of hard use.
Perfect For
- Outback Touring: Lap of Australia or extended remote travel where underbody damage can strand you for days
- Coastal Adventures: Aluminium’s rust resistance makes it the ideal choice for beach driving and coastal exploration
- Tradies & Work Vehicles: Protect your LC250 on rough station tracks, mine sites, and agricultural properties
- Off-Road Weekenders: Charge into challenging trails every weekend with four layers of underbody armour
- Daily Driving: Even sealed roads present risks — potholes, debris, and road imperfections are no match for this set
Compatibility
Precision-engineered for the Toyota Land Cruiser 250 (2024–Present) — all variants and configurations. Compatible with the 2.8L turbodiesel (1GD-FTV) and 2.4L twin-turbo diesel engine options. Designed to integrate with factory underbody mounting points for OEM-quality fitment.
Why RIVAL 4x4?
- Australian-Based Operations & Support: Australian team, Australian warranty, Australian-based customer service
- Globally Engineered. Locally Proven: World-class manufacturing paired with real-world Australian testing
- High-Strength Aluminium Construction: Premium alloy that delivers strength without the weight penalty
- Fast Australia-Wide Dispatch: Quick delivery to metro, regional, and remote destinations across Australia
- National Dealer & Installation Network: Authorised dealers and professional installers across the country
Protect the investment beneath your LC250 — four plates covering engine to fuel tank, because half measures don’t belong in the outback. Order now!
