Toyota Land Cruiser Prado (2009) 4x4 Engine (Pt 1) Bash Plate – Aluminium

RIVAL 4x4 Toyota Land Cruiser Prado (2009) 4x4 Engine (Pt 1) Bash Plate — Aluminium

Weight: 8.5 kg

Heading out on the Simpson Desert through central Australia? Your Toyota Land Cruiser Prado (2009)'s engine oil pan and sump sit exposed beneath the chassis, vulnerable to every rock, stump, and washout. One solid strike and you're looking at a catastrophic oil leak in the middle of nowhere. The RIVAL 4x4 Engine Bash Plate is engineered specifically for your Toyota Land Cruiser Prado (2009), providing full-coverage protection that absorbs and deflects impacts, keeping your engine safe no matter what the trail throws at you.

• ✓ High-Strength 6mm Aluminium Alloy
• ✓ Precision Fit for Your Vehicle
• ✓ Full-Coverage Component Protection
• ✓ Corrosion-Resistant Construction
• ✓ Ventilated Design for Heat Dissipation
• ✓ Bolt-On Installation — No Drilling Required

Key Features

• Material: 6mm High-Strength Aluminium Alloy
• Thickness: 6mm
• Weight: 8.5 kg
• Finish: Textured Matte Black Powder Coat (zinc primer base layer)
• Construction: Deep-Stamped with Reinforcing Ribs for Maximum Rigidity
• Mounting: Bolt-On — Uses Factory Mounting Points, No Drilling Required
• Protection: Provides full-coverage protection for the engine oil pan, sump, and lower engine block
• Fitment: Vehicle-Specific — Precision Laser-Cut for Toyota Land Cruiser Prado (2009)

Why Choose Aluminium Over Steel?

• Significant Weight Savings — Aluminium is approximately 40% lighter than steel at equivalent strength, reducing the load on your vehicle's suspension, improving fuel economy, and preserving payload capacity for gear, water, and supplies.
• Superior Corrosion Resistance — Unlike steel, aluminium naturally forms a protective oxide layer that resists rust and corrosion — even when the powder coat is scratched or gouged. Ideal for coastal driving, creek crossings, and tropical humidity.
• Excellent Energy Absorption — Aluminium's natural flex characteristics allow it to absorb and distribute impact energy rather than transmitting sharp forces into the chassis and mounting points.
• Engineered for Modern Vehicles — Today's 4WD vehicles are precision-engineered with specific weight tolerances. Adding heavy steel plates can affect suspension geometry, braking distances, and GVM. Aluminium delivers serious protection without compromising your vehicle's factory dynamics.

What's Included

• ✓ RIVAL 4x4 Engine Bash Plate (Part 1)
• ✓ Complete Mounting Hardware & Fitting Kit
• ✓ High-Tensile Bolts & Fasteners
• ✓ Installation Instructions

Installation

• Difficulty: Straightforward — suitable for experienced DIY installers or any qualified 4WD workshop
• Requirements: Basic hand tools (spanners, socket set, torque wrench). No specialised equipment needed.
• Bolt-On Design: Attaches directly to factory mounting points on your Toyota Land Cruiser Prado (2009). No drilling, cutting, or permanent modifications required.
• Time: Approximately 30–60 minutes depending on access and experience.
• Professional Installation: Available through RIVAL 4x4's national network of authorised dealers and installation centres across Australia.

Built for Australian Conditions

Australia's off-road environment is among the harshest on earth. From the razor-sharp quartzite rocks of Cape York to the sun-baked corrugations of the Simpson Desert, from salt-crusted coastal tracks to the tropical creek crossings of the Kimberley — your vehicle's underside faces relentless punishment. RIVAL 4x4 bash plates are engineered specifically for these conditions: the 6mm aluminium alloy construction handles direct rock strikes, the deep-stamped reinforcing ribs add structural rigidity where it matters most, and the corrosion-resistant finish stands up to salt air, red dust, muddy creek crossings, and everything in between.

Perfect For

• Remote Touring & Overlanding — Protect your engine on extended outback trips where help is days away
• Coastal & Beach Driving — Shield against hidden rocks and driftwood on sand tracks while resisting salt-air corrosion
• Tradies & Work Sites — Defend your vehicle's underside on rough construction sites, mining access roads, and farm tracks
• Weekend Off-Road Adventures — Hit technical 4WD tracks, fire trails, and river crossings with confidence knowing your engine is fully armoured
• Daily Protection & Peace of Mind — Even on sealed roads, speed bumps, potholes, and car park gutters can damage exposed components

Compatibility

Toyota Land Cruiser Prado (2009) — 4.0L V6 Petrol (1GR-FE), 3.0L Turbo Diesel (1KD-FTV) — All 4WD variants

Not sure if this plate fits your vehicle? Contact the RIVAL 4x4 team at rival4x4.com.au or call our Australian-based support team for fitment confirmation.

Why RIVAL 4x4?

• Australian-Based Operations & Support — Local team, local stock, local knowledge.
• Globally Engineered. Locally Proven. — Developed using advanced 3D scanning and CAD design, then tested on Australian tracks.
• High-Strength Aluminium Construction — 6mm deep-stamped aluminium alloy delivers the perfect balance of strength, weight savings, and corrosion resistance.
• Fast Australia-Wide Dispatch — In-stock items dispatched quickly from our Australian warehouse.
• National Dealer & Installation Network — Authorised RIVAL 4x4 dealers and installation centres across Australia.