/
Description
Set of 5 Aluminium Bash Plates — Toyota Hilux (2015–2025) | New Design
Protects: Radiator, Engine, Transmission, Transfer Case, Fuel Tank & Lower Control Arms
Combined Weight: 36 kg (approx.)
This is the ultimate underbody armour package for the Toyota Hilux. Six critical areas protected by five precision-engineered aluminium plates in RIVAL 4x4's latest New Design configuration, covering everything from the radiator at the front to the lower control arms at the rear. When you're deep into Cape York or hammering across the corrugated red plains west of Alice Springs, this full set ensures every vulnerable component beneath your Hilux is shielded from rocks, stumps, ruts and debris. Buying as a set means complete peace of mind and genuine savings over purchasing each plate individually.
- ✓ Complete Underbody Protection — Radiator, Engine, Transmission, Transfer Case, Fuel Tank & Lower Control Arms
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit for Toyota Hilux (2015–2025)
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle — Maximum Savings vs Buying Individually
What's Protected
- Radiator Bash Plate — Your Hilux's cooling system is the first thing exposed to stone strikes and trail debris. A damaged radiator means instant overheating and a forced stop. This plate guards the entire radiator from frontal and underbody impacts, keeping coolant where it belongs.
- Engine Bash Plate — The engine sump and lower block are critical — a cracked sump drains oil in minutes and can destroy the engine. This plate covers the full underside of the engine bay, absorbing rock strikes and distributing impact forces across its deep-stamped surface.
- Transmission Bash Plate — Sitting behind the engine, the gearbox housing is exposed to rocks and debris on rough tracks. Transmission repairs are among the most expensive on any 4WD. This plate ensures the gearbox casing and shift linkage remain protected.
- Transfer Case Bash Plate — The transfer case is the hub of your Hilux's 4WD system, engaging low range and splitting power between axles. Damage here means no four-wheel drive. This plate shields the transfer case housing from direct hits on rocky terrain.
- Fuel Tank Bash Plate — A punctured fuel tank is one of the most dangerous situations you can face off-road — fuel loss in remote areas can be life-threatening. This plate provides a solid barrier between the road surface and your fuel tank, preventing punctures from rocks and stumps.
- Lower Control Arms Bash Plate — The lower control arms are vital suspension components that maintain wheel alignment and ride quality. A bent or damaged control arm affects handling and can cause tyre wear. This plate guards these exposed arms from side impacts and underbody strikes.
Key Features
- Material: Deep-stamped 6mm high-strength aluminium alloy
- Thickness: 6mm
- Combined Weight: Approx. 36 kg
- Finish: Textured matte black powder coat
- Mounting: Bolt-on to factory mounting points — no drilling or permanent modification
- Number of Plates: 5 (Radiator + Engine + Transmission + Transfer Case + Fuel Tank + Lower Control Arms)
- Fitment: Toyota Hilux (2015–2025), Toyota Fortuner (2015–On) — 4x4 variants
Why Choose Aluminium Over Steel?
- Weight Savings: With five plates on board, weight matters. Aluminium saves approximately 40% compared to steel, keeping your Hilux's GVM in check and preserving payload capacity for gear.
- Corrosion Resistance: Aluminium won't rust, even after years of mud, creek crossings, coastal salt and tropical humidity. The powder coat finish adds another layer of lasting durability.
- Energy Management: Aluminium flexes on impact, absorbing and redistributing energy rather than transmitting it through the chassis. This protects both the component behind the plate and the mounting points on the chassis.
- Modern Vehicle Compatibility: The Hilux's suspension and drivetrain are tuned for a specific weight range. Aluminium protection keeps your vehicle within those parameters, maintaining ride quality and handling.
What's Included
- ✓ 1 x Aluminium Radiator Bash Plate (New Design)
- ✓ 1 x Aluminium Engine Bash Plate (New Design)
- ✓ 1 x Aluminium Transmission Bash Plate (New Design)
- ✓ 1 x Aluminium Transfer Case Bash Plate (New Design)
- ✓ 1 x Aluminium Fuel Tank & Lower Control Arms Bash Plate (New Design)
- ✓ Complete Mounting Hardware & Bolts
- ✓ Step-by-Step Installation Instructions
Installation
- Difficulty: Moderate — straightforward for experienced home mechanics or professional installers
- Requirements: Standard socket set, jack and jack stands (or vehicle hoist)
- Bolt-On Design: All plates mount to factory points — no drilling, cutting or permanent modification required
- Recommendation: Install the complete set in one session. Start from the front (radiator) and work rearward for optimal alignment across all five plates
Built for Australian Conditions
The Toyota Hilux is Australia's best-selling vehicle for good reason — it goes everywhere. But "everywhere" in Australia means corrugated outback highways that shake components loose, rocky creek beds that test every millimetre of ground clearance, coastal sand tracks where salt eats unprotected metal, and tropical conditions where humidity accelerates wear. This full bash plate set is engineered for every one of those scenarios, providing total underbody protection that lasts the life of your Hilux.
Perfect For
- Outback Touring: Multi-day trips through the Simpson Desert, Birdsville Track, Gibb River Road and beyond
- Coastal Adventures: Beach driving, cape runs and island access where salt corrosion is a constant threat
- Tradies & Worksite Use: Daily punishment on construction sites, mining roads, cattle stations and rural properties
- Hardcore Off-Road: Rock crawling, technical descents, river crossings and competition-level trail riding
- Daily Protection: Potholes, speed bumps, road debris and the daily grind of unsealed roads
Compatibility
- Toyota Hilux (2015–2025) — 4x4 models (AN120/AN130)
- Toyota Fortuner (2015–On) — 4x4 models
- Engines: 2.8L 1GD-FTV Turbo Diesel, 2.4L 2GD-FTV Turbo Diesel, 4.0L 1GR-FE V6 Petrol
Why RIVAL 4x4?
- Australian-Based Operations & Support: Local team, local knowledge, local warranty — support from people who drive the same tracks you do
- Globally Engineered. Locally Proven: World-class design and manufacturing, tested and validated on Australian terrain
- High-Strength Aluminium Construction: Premium 6mm alloy plates delivering protection without compromise on weight
- Fast Australia-Wide Dispatch: Quick delivery from Australian warehouses to your door
- National Dealer & Installation Network: Professional fitting available at authorised RIVAL 4x4 dealers and installers across Australia
The complete underbody armour solution for Australia's favourite ute — every plate, every component, total protection. Order now!
/
