Description
Toyota Hilux (2005–2014) Bash Plate Set — Radiator, Engine, Transmission & Transfer Case
Protects: Radiator, Engine, Transmission & Transfer Case
Combined Weight: 11 kg
If your 2005–2014 Hilux is your go-to vehicle for off-road adventures, station work or long outback tours, protecting the complete drivetrain is the smartest upgrade you can make. This RIVAL 4x4 four-plate set covers every critical powertrain component from the radiator through to the transfer case, ensuring your Hilux's cooling system, engine, gearbox and 4WD system are all shielded from the rocks, ruts and debris that define Australian off-road driving. At just 11 kg for four plates, it's protection you'll barely notice on the scales but will absolutely notice when you clear a rocky creek bed without a scratch.
- ✓ Complete Drivetrain Protection — Radiator, Engine, Transmission & Transfer Case
- ✓ High-Strength Aluminium Alloy Construction
- ✓ Precision Fit for Toyota Hilux (2005–2014)
- ✓ Corrosion-Resistant Matte Black Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle — Save vs Buying Individually
What's Protected
- Radiator Bash Plate — Your Hilux's radiator is the gatekeeper of engine temperature. On dusty, rocky tracks it takes a constant barrage of debris that can crack fins, puncture cores and leave you stranded with an overheating engine. This plate provides full radiator coverage, deflecting stones and debris before they reach the cooling system.
- Engine Bash Plate — The oil sump on the 2005–2014 Hilux sits exposed beneath the engine bay. One good rock strike can crack the sump, dump your oil and destroy the engine in minutes. This plate covers the entire lower engine area, absorbing impacts and keeping your engine's lifeblood where it belongs.
- Transmission Bash Plate — The gearbox housing extends behind the engine, where it's vulnerable to anything the engine plate doesn't catch. A cracked transmission housing leads to fluid loss and potential gearbox failure. This plate closes the gap, providing continuous protection from engine to transmission.
- Transfer Case Bash Plate — Without the transfer case, your Hilux can't engage four-wheel drive or low range. On technical terrain, losing 4WD capability can turn a challenging track into a stranding situation. This plate shields the transfer case from direct rock strikes and rut impacts that could damage the housing or seals.
Key Features
- Material: High-grade lightweight aluminium alloy
- Thickness: 6mm
- Combined Weight: 11 kg
- Finish: Matte black powder coat
- Mounting: Bolt-on to factory mounting points — no drilling or permanent modification
- Number of Plates: 4 (Radiator + Engine + Transmission + Transfer Case)
- Fitment: Toyota Hilux (2005–2014), Toyota Fortuner (2011–2015) — 4x4 variants
Why Choose Aluminium Over Steel?
- Weight Savings: Four plates at 11 kg combined is remarkably light. Your Hilux's suspension, braking and fuel economy are effectively unaltered.
- Corrosion Resistance: Aluminium naturally resists rust and corrosion. Whether your Hilux lives near the coast, works in tropical conditions or spends its days on dusty outback roads, these plates won't deteriorate.
- Energy Management: Aluminium deforms progressively on impact, absorbing energy and reducing the force transmitted to the chassis and the component behind the plate.
- Proven Platform, Modern Protection: The 2005–2014 Hilux may be a classic design, but it deserves modern underbody protection that complements rather than compromises its proven capabilities.
What's Included
- ✓ 1 x Aluminium Radiator Bash Plate
- ✓ 1 x Aluminium Engine Bash Plate
- ✓ 1 x Aluminium Transmission Bash Plate
- ✓ 1 x Aluminium Transfer Case Bash Plate
- ✓ Complete Mounting Hardware & Bolts
- ✓ Step-by-Step Installation Instructions
Installation
- Difficulty: Easy to Moderate — straightforward for home mechanics
- Requirements: Standard socket set, jack and jack stands (or vehicle hoist)
- Bolt-On Design: All four plates use factory mounting points — no drilling, welding or permanent modification
- Recommendation: Install all plates in one session for consistent alignment from radiator to transfer case
Built for Australian Conditions
This generation Hilux has conquered every corner of Australia — from the sandy beaches of Moreton Island to the rocky ranges of the Pilbara, from the snow-dusted alpine trails of the High Country to the red-dust plains of central Australia. RIVAL 4x4's aluminium bash plates are engineered for this diversity of conditions, resisting corrosion from salt, moisture, dust and humidity while providing impact protection against the rocks, stumps and ruts that Australian tracks dish out relentlessly.
Perfect For
- Outback Touring: Desert crossings, station tracks and remote unsealed highways
- Coastal Adventures: Beach access, coastal tracks and salt-heavy driving environments
- Tradies & Station Work: Daily protection on rough worksites, farms and mining roads
- Off-Road Weekends: Fire trails, state forests, club runs and technical 4WD tracks
- Long-Term Vehicle Care: Protecting a reliable workhorse that still has plenty of life left in it
Compatibility
- Toyota Hilux (2005–2014) — 4x4 models (KUN/GGN series)
- Toyota Fortuner (2011–2015) — 4x4 models
- Engines: 3.0L 1KD-FTV Turbo Diesel, 2.5L 2KD-FTV Turbo Diesel, 4.0L 1GR-FE V6 Petrol
Why RIVAL 4x4?
- Australian-Based Operations & Support: Real Australian support from people who understand your vehicle and your tracks
- Globally Engineered. Locally Proven: Modern design tools, real-world Australian validation
- High-Strength Aluminium Construction: Premium alloy plates — light, strong and corrosion-proof
- Fast Australia-Wide Dispatch: Shipped quickly from Australian warehouses
- National Dealer & Installation Network: Professional fitting through authorised RIVAL 4x4 installers nationwide
Complete drivetrain armour for the Hilux that refuses to quit — four plates, four components protected, zero compromise. Order now!
