Description
Nissan Patrol Y62 (2010–Present) Bash Plate Set – Radiator, Engine, Transmission & Transfer Case
Full Drivetrain & Cooling Protection: 4-Piece Underbody Armour
Combined Weight: 21.0 kg
The Nissan Patrol Y62 is a full-size wagon with a full-size appetite for off-road adventure — and a full-size underbody that needs protecting. This RIVAL 4x4 four-piece bash plate set armours the radiator, engine, transmission, and transfer case with precision-fit aluminium plates, providing continuous coverage across the Patrol’s most critical mechanical systems. Whether you’re towing a camper through the red centre or tackling the deep ruts of a Cape York station track, four plates stand between your Y62’s drivetrain and disaster.
- ✓ Complete Underbody Protection — 4 Critical Components Covered
- ✓ High-Strength Aluminium Construction
- ✓ Precision Fit for Nissan Patrol Y62 (2010–Present)
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle — Save vs Buying Individually
What's Protected
- Radiator Bash Plate — The Y62’s large radiator manages cooling for its 5.6L V8 engine — a powerplant that generates significant heat under load. A damaged radiator means rapid coolant loss and overheating, particularly dangerous when towing or climbing steep grades in hot conditions. This plate shields the radiator from frontal and underbody debris impacts.
- Engine Bash Plate — The Patrol’s V8 engine represents a substantial investment, and its oil sump sits exposed beneath the chassis. A cracked sump on a remote track means catastrophic oil loss and a seized engine — an outcome that’s as expensive as it is avoidable. This plate provides comprehensive coverage across the engine’s lower surface.
- Transmission Bash Plate — The Y62’s 7-speed automatic transmission is a precision component with a casing that’s vulnerable to underbody strikes. Impacts that crack or dent the housing cause fluid leaks and transmission malfunction. This plate maintains a solid barrier between trail hazards and the gearbox.
- Transfer Case Bash Plate — The transfer case is the nexus of the Patrol’s all-terrain capability, managing power distribution between front and rear axles. Damage here disables the 4WD system entirely. This plate guards the transfer case from rock strikes and debris, keeping your Y62’s legendary off-road ability intact.
Key Features
- Material: High-strength aluminium alloy
- Thickness: 6mm
- Combined Weight: 21.0 kg
- Finish: Textured matte black powder coat — corrosion and UV resistant
- Mounting: Direct bolt-on to factory mounting points
- Number of Plates: 4 (Radiator + Engine + Transmission + Transfer Case)
- Fitment: Nissan Patrol Y62 (2010–Present) — all variants
Why Choose Aluminium Over Steel?
- Weight Savings: At 21.0 kg for four plates, this aluminium set is remarkably light for its coverage area — important for a vehicle that’s often loaded to GVM for touring.
- Corrosion Resistance: Aluminium’s natural resistance to rust means these plates will outlast steel alternatives in creek crossings, coastal conditions, and tropical humidity.
- Energy Management: Aluminium distributes impact forces effectively, protecting mounting hardware and chassis rails from the concentrated stress that can damage steel installations.
- Modern Vehicle Design: The Y62’s independent front suspension benefits from keeping unsprung and accessory weight to a minimum — aluminium delivers that.
What's Included
- ✓ 1x Radiator Bash Plate
- ✓ 1x Engine Bash Plate
- ✓ 1x Transmission Bash Plate
- ✓ 1x Transfer Case Bash Plate
- ✓ Complete Mounting Hardware & Fasteners
- ✓ Fitting Instructions
Installation
- Difficulty: Moderate — suitable for experienced home mechanics or professional fitment
- Requirements: Metric socket set, jack and axle stands or vehicle hoist
- Bolt-On Design: All four plates mount to factory points — no drilling, cutting, or permanent modification
- Recommendation: Install all four plates in a single session for continuous front-to-mid underbody coverage
Built for Australian Conditions
Patrol owners don’t take the easy roads — and Australia doesn’t offer many. From the spinifex-covered gibber plains of the Channel Country to the sharp-edged basalt of the Barkly Tablelands, the terrain under your Y62 is always hostile. Creek crossings in the Wet Top End, salt lakes in Western Australia, and the relentless corrugations of outback highways add moisture, corrosion, and vibration to the mix. RIVAL 4x4 bash plates are engineered for exactly this environment — Australian conditions, Australian-tested protection.
Perfect For
- Outback Touring: Essential drivetrain protection for Patrol owners touring remote Australia with towed campers or loaded roof racks
- Coastal Adventures: Corrosion-resistant aluminium for salt-air beach driving and coastal track exploration
- Tradies & Work Vehicles: Reliable protection for Y62s operating on stations, in mining, and across rural Australia
- Off-Road Weekenders: Four-plate armour for confident trail riding every weekend
- Daily Driving: Protect your Patrol’s underbody from urban potholes, debris, and road imperfections
Compatibility
Precision-engineered for the Nissan Patrol Y62 (2010–Present) — all series and variants including Ti, Ti-L, and Warrior. Compatible with the 5.6L V8 petrol engine (VK56VD). Designed for seamless integration with factory underbody mounting points.
Why RIVAL 4x4?
- Australian-Based Operations & Support: Dedicated Australian support team with local warranty backing
- Globally Engineered. Locally Proven: Advanced manufacturing tested on Australian tracks and trails
- High-Strength Aluminium Construction: Premium alloy plates delivering genuine protection at minimal weight
- Fast Australia-Wide Dispatch: Prompt delivery to any address across Australia
- National Dealer & Installation Network: Professional fitting available through our dealer network nationwide
Your Patrol was built to dominate any terrain — give it the four-plate underbody armour to do it without risk. Order now!
