Set of 2 Aluminium Bash Plates – Ford Ranger Next Gen / Ford Everest Next Gen / Amarok (2023–Present)
Front-Line Underbody Protection: Radiator & Engine Bash Plates
Installation Manual
Combined Weight: 12.0 kg
Not every build needs six plates from the outset — but every build should start with radiator and engine protection. This RIVAL 4x4 two-plate set covers the two most forward and most vulnerable components on your Ford Ranger Next Gen, Everest Next Gen, or Amarok 2023+. At just 12 kg combined, it’s the lightest entry point into serious underbody armour, and it protects the two systems that will cost you the most if damaged on a remote trail. Think of it as essential insurance for your cooling system and powerplant.
- ✓ Complete Underbody Protection — Radiator & Engine
- ✓ High-Strength 6mm Deep-Stamped Aluminium Alloy
- ✓ Precision Laser-Cut for Perfect Fitment
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle — Save vs Buying Individually
What's Protected
-
Radiator Bash Plate — The radiator is your engine’s temperature regulator, and it sits at the very front of the underbody where it encounters debris first. Stones kicked by the front tyres, branches on overgrown tracks, and rocks at water crossing entries all target the radiator core. A single puncture means rapid coolant loss and engine overheating. This plate provides a first-line shield for the entire cooling system.
-
Engine Bash Plate — Behind the radiator plate, the engine bash plate covers the oil sump and lower block — the components most frequently damaged on 4WD vehicles. A breached sump means oil loss, and without oil your engine seizes within minutes. This 6mm aluminium plate absorbs rock strikes and deflects trail debris, keeping your engine sealed and lubricated.
Key Features
-
Material: 6mm deep-stamped aluminium alloy
-
Thickness: 6mm
-
Combined Weight: 12.0 kg
-
Finish: Textured matte black powder coat — corrosion and UV resistant
-
Mounting: Direct bolt-on to factory mounting points
-
Number of Plates: 2 (Radiator + Engine)
-
Fitment: Ford Ranger Next Gen (2022+), Ford Everest Next Gen, VW Amarok (2023+)
Why Choose Aluminium Over Steel?
-
Weight Savings: At only 12 kg combined, this aluminium set is featherweight compared to steel — you’ll barely notice it on the scales but you’ll appreciate it on the trail.
-
Corrosion Resistance: Aluminium doesn’t rust, period. Creek crossings, beach driving, coastal salt air — none of it affects aluminium the way it attacks steel.
-
Energy Management: Aluminium’s flex characteristics absorb impacts efficiently, protecting both the plate and the chassis mounts from concentrated force.
-
Modern Vehicle Design: Adding just 12 kg has virtually zero impact on handling, braking, or fuel economy — protection with no trade-offs.
What's Included
- ✓ 1x Radiator Bash Plate
- ✓ 1x Engine Bash Plate
- ✓ Complete Mounting Hardware & Fasteners
- ✓ Fitting Instructions
Installation
-
Difficulty: Easy to Moderate — straightforward for any home mechanic
-
Requirements: Metric socket set, jack and axle stands or vehicle hoist
-
Bolt-On Design: Both plates mount to factory attachment points — no drilling, cutting, or modification
-
Recommendation: Install both plates together for continuous front-end underbody coverage in under an hour
Built for Australian Conditions
Your radiator and engine face the first impacts on any trail — they’re the frontline of your underbody. In Australia, that frontline encounters quartzite on Cape York’s rocky stages, volcanic basalt on Victorian alpine tracks, sandstone ledges in the Blue Mountains, and the constant barrage of gravel on outback roads. Salt spray accelerates corrosion on coastal routes, while tropical humidity traps moisture against unprotected surfaces. RIVAL 4x4’s aluminium construction handles all of it without breaking down.
Perfect For
-
Outback Touring: Essential front-end protection for any off-bitumen adventure in remote Australia
-
Coastal Adventures: Corrosion-proof aluminium that handles beach driving and salt environments
-
Tradies & Work Vehicles: Lightweight, effective protection for vehicles on rough job sites and rural roads
-
Off-Road Weekenders: Entry-level underbody armour for regular trail use
-
Daily Driving: Protect against road debris, potholes, and urban hazards during the daily commute
Compatibility
Precision-engineered for the shared T6.2 platform:
Ford Ranger Next Gen (2022+) — all variants including XL, XLS, XLT, Sport, and Wildtrak
Ford Everest Next Gen — all variants
Volkswagen Amarok (2023+) — all variants
Compatible with 2.0L Bi-Turbo, 3.0L V6 Turbo Diesel, and 2.3L EcoBoost engine configurations.
Why RIVAL 4x4?
-
Australian-Based Operations & Support: Local Australian team providing genuine product support and warranty
-
Globally Engineered. Locally Proven: Precision laser-cut manufacturing proven on Australian trails
-
High-Strength Aluminium Construction: 6mm deep-stamped alloy for real-world impact protection
-
Fast Australia-Wide Dispatch: Quick delivery to any address across Australia
-
National Dealer & Installation Network: Professional fitting available at dealers nationwide
Start your underbody build where it matters most — protect the radiator and engine first, expand later. Order now!
