Set of 2 Aluminium Bash Plates — Ford F-150 (2014–Present)
Protects: Radiator & Engine
Installation Manual
Combined Weight: 10.5 kg
When you're threading your F-150 through rocky mountain passes or hammering down a corrugated outback highway at pace, the radiator and engine sump are the two components most likely to take a direct hit from below. A cracked radiator or punctured sump doesn't just end your day — it can mean thousands in repairs and a flatbed ride home. The RIVAL 4x4 Set of 2 Aluminium Bash Plates provides targeted, precision-fit protection for these two critical areas, delivering peace of mind at a combined weight of just 10.5 kg. It's the essential starting point for anyone serious about looking after their F-150's underbody.
- ✓ Complete Underbody Protection — Radiator & Engine Coverage
- ✓ High-Strength Aluminium Alloy Construction
- ✓ Precision Fit for Ford F-150 (2014–Present)
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle — Save vs Buying Individually
What's Protected
-
Radiator Bash Plate — The F-150's radiator sits forward and low, making it a prime target for stone strikes, gravel spray and debris kicked up on unsealed roads. A single puncture can drain coolant rapidly, leading to overheating and potential engine damage. This plate provides a solid barrier between the road and your cooling system, ensuring your F-150 keeps its cool in the harshest conditions.
-
Engine Bash Plate — Protecting the engine sump and lower block from rock impacts, stumps and ruts is non-negotiable for off-road driving. A cracked sump means total oil loss and catastrophic engine failure. This plate covers the vulnerable underside of the engine bay, spreading impact energy across its surface to keep your powerplant safe.
Key Features
-
Material: High-strength aluminium alloy
-
Thickness: 6mm
-
Combined Weight: 10.5 kg
-
Finish: Textured matte black powder coat
-
Mounting: Bolt-on to factory mounting points — no drilling or permanent modification
-
Number of Plates: 2 (Radiator + Engine)
-
Fitment: Ford F-150 (2014–Present) — 4x4 variants
Why Choose Aluminium Over Steel?
-
Weight Savings: At 10.5 kg combined, this aluminium set weighs significantly less than a comparable steel setup, preserving the F-150's ride quality and fuel efficiency.
-
Corrosion Resistance: Aluminium won't rust, even after years of exposure to mud, salt water, creek crossings and coastal air. The powder coat finish adds another layer of long-term durability.
-
Energy Management: Aluminium flexes and absorbs impact energy rather than transferring it directly to chassis mounts, providing superior protection for sensitive components.
-
Modern Vehicle Compatibility: Ford built the F-150 with an aluminium body for good reason. RIVAL 4x4's aluminium bash plates follow the same engineering logic — maximum strength, minimum weight.
What's Included
- ✓ 1 x Aluminium Radiator Bash Plate
- ✓ 1 x Aluminium Engine Bash Plate
- ✓ Complete Mounting Hardware & Bolts
- ✓ Step-by-Step Installation Instructions
Installation
-
Difficulty: Easy — a straightforward job for any home mechanic
-
Requirements: Standard socket set, jack and jack stands (or vehicle hoist)
-
Bolt-On Design: Mounts directly to existing factory points — no drilling, welding or permanent modifications
-
Time: Both plates can be installed in under an hour for a seamless, aligned fit
Built for Australian Conditions
Whether you're crossing the Simpson Desert's endless dune fields, navigating the Canning Stock Route's remote corrugations, or simply tackling a rough access road on a rural property, your F-150's underbody is under constant assault. Sharp rocks, hidden stumps, bulldust-covered ruts and the relentless corrosion of coastal salt air all take their toll. RIVAL 4x4's aluminium bash plates are purpose-built for these conditions, combining corrosion-resistant alloy with a durable powder coat finish that won't quit when the going gets tough.
Perfect For
-
Outback Touring: Long-distance trips through remote Australian terrain where reliability is everything
-
Coastal Adventures: Beach access tracks, island 4WDing and salt-heavy environments
-
Tradies & Commercial Operators: Day-in, day-out protection on worksites, farms and mining access roads
-
Recreational Off-Road: Weekend trail rides, state forests and national park tracks
-
Daily Driving: Protection from potholes, speed bumps and urban road hazards
Compatibility
- Ford F-150 (2014–Present) — 4x4 models
- Engines: 3.5L EcoBoost V6, 5.0L Coyote V8, 2.7L EcoBoost V6, 3.3L Ti-VCT V6
Why RIVAL 4x4?
-
Australian-Based Operations & Support: Real people, real support, based right here in Australia
-
Globally Engineered. Locally Proven: Advanced design and engineering validated on Australia's most demanding tracks
-
High-Strength Aluminium Construction: 6mm alloy plates built for serious protection without the weight penalty
-
Fast Australia-Wide Dispatch: Quick shipping from local warehouses to anywhere in Australia
-
National Dealer & Installation Network: Have your plates professionally fitted by an authorised RIVAL 4x4 installer near you
Protect your F-150 where it matters most — essential radiator and engine armour, engineered for the Australian way of life. Order now!
