Toyota Land Cruiser 250 (2024-Present) 4x4 Gearbox Bash Plate – Aluminium - New

RIVAL 4x4 Toyota Land Cruiser 250 (2024-Present) 4x4 Gearbox Bash Plate — Aluminium

Gearbox Protection

Installation Manual - Click here

Weight: 9.8 kg

Your Toyota Land Cruiser 250 (Prado)'s gearbox is a precision-engineered assembly that sits low beneath the chassis — directly in the firing line of rocks, stumps, and rutted tracks. Whether you're threading through Gibb River Road in the Kimberley or navigating a rocky river crossing, a single impact to the gearbox housing can mean a catastrophic failure far from help. The RIVAL 4x4 Gearbox Bash Plate provides purpose-built protection that keeps your transmission safe, so you can focus on the trail ahead.

• ✓ High-Strength 6mm Aluminium Alloy
• ✓ Precision Fit for Your Vehicle
• ✓ Full-Coverage Component Protection
• ✓ Corrosion-Resistant Construction
• ✓ Ventilated Design for Heat Dissipation
• ✓ Bolt-On Installation — No Drilling Required

Key Features

• Material: 6mm High-Strength Aluminium Alloy
• Thickness: 6mm
• Weight: 9.8 kg
• Finish: Textured Matte Black Powder Coat (zinc primer base layer)
• Construction: Deep-Stamped with Reinforcing Ribs for Maximum Rigidity
• Mounting: Bolt-On — Uses Factory Mounting Points, No Drilling Required
• Protection: Provides complete shielding for the gearbox housing and bell housing
• Fitment: Vehicle-Specific — Precision Laser-Cut for Toyota Land Cruiser 250 (Prado)

Why Choose Aluminium Over Steel?

• Significant Weight Savings — Aluminium is approximately 40% lighter than steel at equivalent strength, reducing the load on your vehicle's suspension, improving fuel economy, and preserving payload capacity for gear, water, and supplies.
• Superior Corrosion Resistance — Unlike steel, aluminium naturally forms a protective oxide layer that resists rust and corrosion — even when the powder coat is scratched or gouged. Ideal for coastal driving, creek crossings, and tropical humidity.
• Excellent Energy Absorption — Aluminium's natural flex characteristics allow it to absorb and distribute impact energy rather than transmitting sharp forces into the chassis and mounting points.
• Engineered for Modern Vehicles — Today's 4WD vehicles are precision-engineered with specific weight tolerances. Adding heavy steel plates can affect suspension geometry, braking distances, and GVM. Aluminium delivers serious protection without compromising your vehicle's factory dynamics.

What's Included

• ✓ RIVAL 4x4 Gearbox Bash Plate
• ✓ Complete Mounting Hardware & Fitting Kit
• ✓ High-Tensile Bolts & Fasteners
• ✓ Installation Instructions

Installation

• Difficulty: Straightforward — suitable for experienced DIY installers or any qualified 4WD workshop
• Requirements: Basic hand tools (spanners, socket set, torque wrench). No specialised equipment needed.
• Bolt-On Design: Attaches directly to factory mounting points on your Toyota Land Cruiser 250. No drilling, cutting, or permanent modifications required.
• Time: Approximately 30–60 minutes depending on access and experience.
• Professional Installation: Available through RIVAL 4x4's national network of authorised dealers and installation centres across Australia.

Built for Australian Conditions

Australia's off-road environment is among the harshest on earth. From the razor-sharp quartzite rocks of Cape York to the sun-baked corrugations of the Simpson Desert, from salt-crusted coastal tracks to the tropical creek crossings of the Kimberley — your vehicle's underside faces relentless punishment. RIVAL 4x4 bash plates are engineered specifically for these conditions: the 6mm aluminium alloy construction handles direct rock strikes, the deep-stamped reinforcing ribs add structural rigidity where it matters most, and the corrosion-resistant finish stands up to salt air, red dust, muddy creek crossings, and everything in between. Whether you're a grey nomad on a lap of Australia, a tradie working remote mine sites, or a weekend warrior hitting the Victorian High Country — RIVAL underbody protection is built for the conditions you actually drive in.

Perfect For

• Remote Touring & Overlanding — Protect your gearbox on extended outback trips where help is days away
• Coastal & Beach Driving — Shield against hidden rocks and driftwood on sand tracks while resisting salt-air corrosion
• Tradies & Work Sites — Defend your vehicle's underside on rough construction sites, mining access roads, and farm tracks
• Weekend Off-Road Adventures — Hit technical 4WD tracks, fire trails, and river crossings with confidence knowing your gearbox is fully armoured
• Daily Protection & Peace of Mind — Even on sealed roads, speed bumps, potholes, and car park gutters can damage exposed components

Compatibility

Toyota Land Cruiser 250 (2024-Present) — 2.8L Turbo Diesel (1GD-FTV), 2.4L Turbo Petrol, 2.7L Petrol — All 4WD variants including VX, GXL, Sahara, and Kakadu trims

Not sure if this plate fits your vehicle? Contact the RIVAL 4x4 team at rival4x4.com.au or call our Australian-based support team for fitment confirmation.

Why RIVAL 4x4?

• Australian-Based Operations & Support — Local team, local stock, local knowledge.
• Globally Engineered. Locally Proven. — Developed using advanced 3D scanning and CAD design, then tested on Australian tracks.
• High-Strength Aluminium Construction — 6mm deep-stamped aluminium alloy delivers the perfect balance of strength, weight savings, and corrosion resistance.
• Fast Australia-Wide Dispatch — In-stock items dispatched quickly from our Australian warehouse.
• National Dealer & Installation Network — Authorised RIVAL 4x4 dealers and installation centres across Australia.