Description
Aluminium Lower Control Arms Bash Plate — Ford Ranger Next Gen / Everest Next Gen / VW Amarok (2023–Present)
Front Lower Control Arm Protection
Installation Manual - Click here
Weight: 4 kg
When you're threading your Next Gen Ranger through the rugged trails of the Victorian High Country, where granite outcrops and fallen timber create constant hazards beneath your vehicle, your front lower control arms are among the most exposed components on the chassis. These precision suspension parts sit at rock height on either side of your vehicle — perfectly positioned to collect impacts from side rocks, rut edges, and embedded trail debris. The RIVAL 4x4 Lower Control Arms Bash Plate for the Ford Ranger Next Gen, Everest Next Gen, and VW Amarok 2023+ delivers targeted protection for your front lower control arms — the suspension components most exposed to side impacts from rocks, ruts, and trail debris. At just 4 kg, this deep-stamped 6mm aluminium shield adds negligible weight while preventing damage that could compromise your steering geometry and ride quality.
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit — Vehicle-Specific Design for Ranger/Everest/Amarok 2023+
- ✓ Front Suspension Component Coverage
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Airflow & Debris Drainage
- ✓ Bolt-On Installation — No Drilling Required
Key Features
- Material: 6mm Deep-Stamped High-Strength Aluminium Alloy (5251 grade)
- Thickness: 6mm
- Weight: 4 kg
- Finish: Textured Matte Black Polymer Powder Coat
- Mounting: Direct bolt-on to factory mounting points — no drilling or chassis modification required
- Fitment: Ford Ranger Next Gen / Ford Everest Next Gen / VW Amarok (2023–Present)
Why Choose Aluminium Over Steel?
- Weight Savings: Aluminium is approximately 40% lighter than steel, reducing unsprung mass on your suspension for better ride quality, improved fuel economy, and preserved GVM capacity.
- Corrosion Resistance: Unlike steel, aluminium naturally forms a protective oxide layer. Combined with powder coating, your bash plate won't rust — even after years of salt-air exposure, water crossings, and red-dust trails.
- Energy Absorption: Aluminium's natural flex absorbs and distributes impact energy across the plate rather than transferring sharp jolts directly to control arm bushings and ball joints.
- Modern Vehicle Design: Today's 4WDs are engineered with tight weight budgets. Aluminium bash plates protect your vehicle without pushing you over GVM limits — critical for insurance, warranty, and roadworthiness compliance.
What's Included
- ✓ 1x RIVAL Lower Control Arms Bash Plate (pair) for Ranger/Everest/Amarok 2023+
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ High-Tensile Bolts & Fasteners
- ✓ Installation Instructions
Installation
- Difficulty: Easy — suitable for home mechanics with basic tools
- Requirements: Standard socket set, jack & stands or vehicle hoist
- Bolt-On Design: Mounts directly to factory mounting points with no drilling, cutting, or permanent modification. Fully reversible installation that won't affect your vehicle's warranty.
Built for Australian Conditions
Australia's off-road terrain is uniquely punishing for front suspension components. The Victorian High Country's granite boulders, the Kimberley's sharp laterite edges, and Cape York's rocky creek beds all target the exposed lower control arms sitting at perfect rock-strike height. Add corrugated outback roads that loosen every fastener, and it's clear why protection matters.
RIVAL bash plates are designed and tested for exactly these conditions. The deep-stamped construction creates integrated stiffening ribs that provide up to two times the impact resistance of flat-plate designs. The powder coat finish resists UV degradation, salt corrosion, and abrasive red dust. Precision drain holes prevent mud and water pooling around suspension components.
Perfect For
- Long-distance outback touring — Cape York, Gibb River Road, Simpson Desert
- Coastal driving where salt air accelerates corrosion on exposed suspension components
- Tradies and fleet vehicles operating on construction sites, farms, and mining roads
- Serious off-road adventures including rock crawling, river crossings, and rutted tracks
- Daily driving with peace of mind knowing your lower control arms are shielded from road debris and hazards
Compatibility
Vehicle: Ford Ranger Next Gen / Ford Everest Next Gen / VW Amarok (2023–Present)
Engine Options: 2.0L Bi-Turbo Diesel, 3.0L V6 Turbo Diesel, 3.0L V6 Turbo Petrol (Amarok)
Variants: All cab configurations and trim levels for the specified model years. Verify fitment with your vehicle's build date and chassis number if unsure.
Why RIVAL 4x4?
- Australian-Based Operations & Support: Local team, local warranty, local knowledge. Phone and email support from people who actually drive these tracks.
- Globally Engineered. Locally Proven: Designed using advanced CAD/CAM and FEA stress analysis, then tested on Australia's toughest tracks to ensure real-world performance.
- High-Strength Aluminium Construction: Premium 5251-grade alloy, deep-stamped for maximum rigidity, finished with durable polymer powder coat.
- Fast Australia-Wide Dispatch: Stocked locally for rapid delivery to metro, regional, and remote addresses across Australia.
- National Dealer & Installation Network: Professional fitting available through RIVAL's network of authorised dealers and 4x4 workshops across every state and territory.
Your suspension is only as strong as its weakest point. Shield your Ranger's lower control arms with RIVAL 4x4 — engineered protection at just 4 kg. Order now!
