Aluminium Radiator Bash Plate — Ford Ranger PX1/PX2/PX3 (2012–2022) / Everest (2015–2022) / Mazda BT-50 (2011–2020)
Radiator & Cooling System Protection
Installation Manual - Click here
Weight: 8.5 kg
When you're weaving through the jarrah forests near Nannup, where logging-trail debris and creek crossings demand reliable underbody armour, your Ford Ranger, Everest, or Mazda BT-50's radiator is working hard and sitting exposed. The radiator is positioned at the very front of the vehicle — the first component to meet flying rocks from the vehicle ahead, branches overhanging the trail, and debris flung up by your own front wheels. The RIVAL 4x4 Radiator Bash Plate delivers precision-engineered protection for your radiator and cooling system — a cracked radiator in the outback means an overheated engine and a very expensive tow. Crafted from deep-stamped 6mm high-strength aluminium alloy, this 8.5 kg plate provides comprehensive cooling system protection with integrated airflow design.
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit — Vehicle-Specific Design for Ranger PX / Everest / BT-50
- ✓ Full Radiator & Cooling System Coverage
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Airflow & Debris Drainage
- ✓ Bolt-On Installation — No Drilling Required
Key Features
-
Material: 6mm Deep-Stamped High-Strength Aluminium Alloy (5251 grade)
-
Thickness: 6mm
-
Weight: 8.5 kg
-
Finish: Textured Matte Black Polymer Powder Coat
-
Mounting: Direct bolt-on to factory mounting points — no drilling or chassis modification required
-
Fitment: Ford Ranger PX1/PX2/PX3 (2012–2022) / Ford Everest (2015–2022) / Mazda BT-50 (2011–2020)
Why Choose Aluminium Over Steel?
-
Weight Savings: Aluminium is approximately 40% lighter than steel, keeping front-end weight balanced for better handling and brake performance.
-
Corrosion Resistance: Unlike steel, aluminium naturally forms a protective oxide layer. Combined with powder coating, your bash plate won't rust — essential at the front of the vehicle where water, mud, and salt spray are constant companions.
-
Energy Absorption: Aluminium's natural flex absorbs and distributes impact energy across the plate, protecting the delicate radiator fins and tubes from puncture impacts.
-
Airflow Optimisation: Aluminium's strength-to-weight ratio allows integrated ventilation without compromising protection — your engine stays cool even in the harshest conditions.
What's Included
- ✓ 1x RIVAL Radiator Bash Plate for Ranger PX / Everest / BT-50
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ High-Tensile Bolts & Fasteners
- ✓ Installation Instructions
Installation
-
Difficulty: Easy — suitable for home mechanics with basic tools
-
Requirements: Standard socket set, jack & stands or vehicle hoist
-
Bolt-On Design: Mounts directly to factory mounting points with no drilling, cutting, or permanent modification. Fully reversible installation.
Built for Australian Conditions
Australian temperatures are brutal on cooling systems. Summer in the outback pushes air temperatures past 45°C, while towing and low-speed off-road work generate enormous heat loads. A compromised radiator in these conditions means rapid overheating and potential engine damage. Add the flying rocks of unsealed roads and the debris of construction sites, and radiator protection is essential for any working or touring Ranger, Everest, or BT-50.
RIVAL radiator bash plates address all of these threats. Deep-stamped construction provides stiffening ribs for impact resistance while maintaining airflow. Powder coat resists UV, salt, and abrasive dust.
Perfect For
- Long-distance outback touring — Cape York, Gibb River Road, Simpson Desert
- Coastal driving where salt spray and gravel threaten cooling systems
- Tradies and fleet vehicles on construction sites, farms, and mining roads
- Family adventures in the Everest across fire trails and national parks
- Daily driving with peace of mind knowing your radiator is armoured against road debris
Compatibility
Vehicle: Ford Ranger PX1/PX2/PX3 (2012–2022) / Ford Everest (2015–2022) / Mazda BT-50 (2011–2020)
Engine Options: 2.2L TDCi, 3.2L TDCi 5-Cylinder Turbo Diesel, 2.0L Bi-Turbo Diesel (PX3)
Variants: All cab configurations and trim levels. Verify fitment with your vehicle's build date and chassis number if unsure.
Why RIVAL 4x4?
-
Australian-Based Operations & Support: Local team, local warranty, local knowledge. Phone and email support from people who actually drive these tracks.
-
Globally Engineered. Locally Proven: Designed using advanced CAD/CAM and FEA stress analysis, then tested on Australia's toughest tracks to ensure real-world performance.
-
High-Strength Aluminium Construction: Premium 5251-grade alloy, deep-stamped for maximum rigidity, finished with durable polymer powder coat.
-
Fast Australia-Wide Dispatch: Stocked locally for rapid delivery to metro, regional, and remote addresses across Australia.
-
National Dealer & Installation Network: Professional fitting available through RIVAL's network of authorised dealers and 4x4 workshops across every state and territory.
Your engine needs to stay cool to keep running. Protect your Ranger's radiator with RIVAL 4x4 — 8.5 kg of aluminium armour with engineered airflow. Order now!
