The 18mm Winch Mount Spacer Kit provides sufficient clearance rearward to clear the motor on high mount bullbars when fitting a low mount winch.
This winch mounting spacer kit was requested by owners of winch bull bars that were specifically made to fit the narrow style Warn High Mount Winches. A lot of people simply want to run a low mount style winch like the Carbon Winch CW-12K winch. The main issue with these high mount winch bullbars is the centre cradle usually has wings that sweep back to the main part of the bar, meaning the wider low mount winch will hit on the electric motor side before it's able to reach the mounting cradle surface.
Our 18mm (0.7in) thick spacers will provide sufficient clearance rearward to clear the motor on the bullbars.
There are no bolts supplied with this kit, due to multiple applications and mounting situations it's hard to cater for every application. You can source Grade 8.8 high tensile mounting bolts in your required length from any hardware or bolt supplier.
Features
-
Material: 6061 T6 Aluminium
-
Thickness: 18mm (0.7in) thick
-
Width: 39mm (1.5in) wide
Contents
4 x 18mm (0.7in) Aluminium Spacers
| Feature |
Specification Metric (Imperial) |
| Material |
6061 T6 Aluminium |
| Thickness |
18mm (0.7in) |
| Width |
39mm (1.5in) |
