Chevrolet Silverado 5.3L AT 4WD Crew Cab (2019-2024) Transmission Bash Plate – Aluminium

RIVAL 4x4 Chevrolet Silverado 5.3L 4WD (2019-2024) Transmission Bash Plate — Aluminium

Weight: 8.5 kg

Your Chevrolet Silverado’s transmission takes a beating on every off-road adventure — especially on the unforgiving tracks around Kakadu National Park in the Northern Territory. Exposed beneath the vehicle, the transmission housing is a prime target for rocks, stumps, and washouts. One solid hit can crack the casing, leaving you with a catastrophic leak and no way forward. The RIVAL 4x4 Transmission Bash Plate is precision-engineered to shield this critical drivetrain component, so you can push further into Australia’s wildest terrain.

• ✓ High-Strength 6mm Aluminium Alloy
• ✓ Precision Fit for Your Vehicle
• ✓ Full-Coverage Component Protection
• ✓ Corrosion-Resistant Construction
• ✓ Ventilated Design for Heat Dissipation
• ✓ Bolt-On Installation — No Drilling Required

Key Features

• Material: 6mm High-Strength Aluminium Alloy
• Thickness: 6mm
• Weight: 8.5 kg
• Finish: Textured Matte Black Powder Coat (zinc primer base layer)
• Construction: Deep-Stamped with Reinforcing Ribs for Maximum Rigidity
• Mounting: Bolt-On — Uses Factory Mounting Points, No Drilling Required
• Protection: Provides full-coverage protection for the transmission housing and output shaft area
• Fitment: Vehicle-Specific — Precision Laser-Cut for Chevrolet Silverado 5.3L 4WD Crew Cab

Why Choose Aluminium Over Steel?

• Significant Weight Savings — Aluminium is approximately 40% lighter than steel at equivalent strength, preserving your Silverado’s payload capacity for work gear and supplies.
• Superior Corrosion Resistance — Aluminium naturally forms a protective oxide layer that resists rust — even when the powder coat is scratched. Ideal for coastal and wet conditions.
• Excellent Energy Absorption — Aluminium’s flex characteristics absorb and distribute impact energy rather than transmitting forces into the chassis.
• Engineered for Full-Size Trucks — Purpose-designed to protect the Silverado’s transmission without adding unnecessary weight to an already heavy-duty platform.

What’s Included

• ✓ RIVAL 4x4 Transmission Bash Plate
• ✓ Complete Mounting Hardware & Fitting Kit
• ✓ High-Tensile Bolts & Fasteners
• ✓ Installation Instructions

Installation

• Difficulty: Straightforward — suitable for experienced DIY installers or any qualified workshop
• Requirements: Basic hand tools (spanners, socket set, torque wrench).
• Bolt-On Design: Attaches directly to factory mounting points on your Silverado. No drilling or modifications required.
• Time: Approximately 30–60 minutes depending on access and experience.
• Professional Installation: Available through RIVAL 4x4’s national dealer network.

Built for Australian Conditions

Australia’s off-road environment is among the harshest on earth. From razor-sharp quartzite rocks to sun-baked corrugations, from salt-crusted coastal tracks to tropical creek crossings — your vehicle’s underside faces relentless punishment. RIVAL 4x4 bash plates are engineered for these conditions: 6mm aluminium handles direct rock strikes, deep-stamped ribs add rigidity, and the corrosion-resistant finish stands up to salt air, red dust, and everything in between.

Perfect For

• Remote Touring & Overlanding — Protect your transmission on extended outback trips where help is days away
• Coastal & Beach Driving — Shield against hidden rocks while resisting salt-air corrosion
• Tradies & Work Sites — Defend your Silverado’s underside on rough construction sites and mining access roads
• Weekend Off-Road Adventures — Hit technical tracks and river crossings with confidence
• Daily Protection & Peace of Mind — Guard against speed bumps, potholes, and car park gutters

Compatibility

Chevrolet Silverado 1500 5.3L V8 AT 4WD Crew Cab (2019-2024) — 5.3L EcoTec3 V8 (L84/L82) — All 4WD Crew Cab variants including LT, LTZ, RST, High Country trims

Not sure if this plate fits your vehicle? Contact the RIVAL 4x4 team at rival4x4.com.au or call our Australian-based support team.

Why RIVAL 4x4?

• Australian-Based Operations & Support — Local team, local stock, local knowledge.
• Globally Engineered. Locally Proven. — Advanced 3D scanning and CAD design, tested on Australian tracks.
• High-Strength Aluminium Construction — 6mm deep-stamped aluminium alloy for strength, weight savings, and corrosion resistance.
• Fast Australia-Wide Dispatch — In-stock items dispatched quickly from our Australian warehouse.
• National Dealer & Installation Network — Professional fitting available across Australia.