Aluminium Radiator Bash Plate - Ford F-150 (2014-Present)
Radiator & Cooling System Protection
Installation Manual - Click here
Weight: 5.9 kg
When you're tackling the unforgiving dunes of the Simpson Desert, where endless corrugated tracks and sharp spinifex stumps test every millimetre of your underbody, your Ford F-150's radiator is dangerously exposed. A single stone strike to the cooling system out here means an overheated engine and a recovery bill measured in thousands. The RIVAL 4x4 Radiator Bash Plate for the Ford F-150 delivers precision-engineered protection for your radiator and cooling system — a cracked radiator in the outback means an overheated engine and a very expensive tow. Crafted from deep-stamped 6mm high-strength aluminium alloy, this plate shields your cooling system from rocks, debris, and trail hazards without adding unnecessary weight.
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit — Vehicle-Specific Design for Ford F-150
- ✓ Full Radiator & Cooling System Coverage
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Airflow & Debris Drainage
- ✓ Bolt-On Installation — No Drilling Required
Key Features
-
Material: 6mm Deep-Stamped High-Strength Aluminium Alloy (5251 grade)
-
Thickness: 6mm
-
Weight: 5.9 kg
-
Finish: Textured Matte Black Polymer Powder Coat
-
Mounting: Direct bolt-on to factory mounting points — no drilling or chassis modification required
-
Fitment: Ford F-150 (2014-Present)
Why Choose Aluminium Over Steel?
-
Weight Savings: Aluminium is approximately 40% lighter than steel, reducing the load on your suspension, improving fuel economy, and preserving your vehicle's GVM for gear, water, and recovery equipment.
-
Corrosion Resistance: Unlike steel, aluminium naturally forms a protective oxide layer. Combined with powder coating, your bash plate won't rust — even after years of salt-air exposure, water crossings, and red-dust trails.
-
Energy Absorption: Aluminium's natural flex absorbs and distributes impact energy across the plate rather than transferring sharp jolts directly to mounting points and chassis rails.
-
Modern Vehicle Design: Today's 4WDs are engineered with tight weight budgets. Aluminium bash plates protect your vehicle without pushing you over GVM limits — critical for insurance, warranty, and roadworthiness compliance.
What's Included
- ✓ 1x RIVAL Radiator Bash Plate for Ford F-150
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ High-Tensile Bolts & Fasteners
- ✓ Installation Instructions
Installation
-
Difficulty: Easy — suitable for home mechanics with basic tools
-
Requirements: Standard socket set, jack & stands or vehicle hoist
-
Bolt-On Design: Mounts directly to factory mounting points with no drilling, cutting, or permanent modification. Fully reversible installation that won't affect your vehicle's warranty.
Built for Australian Conditions
From the tropical humidity of Far North Queensland to the bone-dry heat of Central Australia, your F-150's cooling system works overtime to keep your engine at operating temperature. A compromised radiator in these conditions isn't just an inconvenience — it's potentially dangerous. RIVAL bash plates are designed and tested for exactly these extremes.
The deep-stamped construction creates integrated stiffening ribs that provide up to two times the impact resistance of flat-plate designs. The powder coat finish resists UV degradation, salt corrosion, and the abrasive red dust that penetrates everything. Precision drain holes prevent mud and water pooling while maintaining full radiator airflow.
Perfect For
- Long-distance outback touring — Cape York, Gibb River Road, Simpson Desert
- Coastal driving where salt air accelerates corrosion on exposed components
- Tradies and fleet vehicles operating on construction sites, farms, and mining roads
- Serious off-road adventures including rock crawling, river crossings, and rutted tracks
- Daily driving with peace of mind knowing your radiator is protected from road debris and parking hazards
Compatibility
Vehicle: Ford F-150 (2014-Present)
Engine Options: 3.5L V6 EcoBoost, 3.5L V6 PowerBoost Hybrid, 5.0L V8 Coyote (excludes 2.7L V6)
Variants: All cab configurations and trim levels for the specified model years. Verify fitment with your vehicle's build date and chassis number if unsure.
Why RIVAL 4x4?
-
Australian-Based Operations & Support: Local team, local warranty, local knowledge. Phone and email support from people who actually drive these tracks.
-
Globally Engineered. Locally Proven: Designed using advanced CAD/CAM and FEA stress analysis, then tested on Australia's toughest tracks to ensure real-world performance.
-
High-Strength Aluminium Construction: Premium 5251-grade alloy, deep-stamped for maximum rigidity, finished with durable polymer powder coat.
-
Fast Australia-Wide Dispatch: Stocked locally for rapid delivery to metro, regional, and remote addresses across Australia.
-
National Dealer & Installation Network: Professional fitting available through RIVAL's network of authorised dealers and 4x4 workshops across every state and territory.
Don't let a single rock end your trip. Protect your Ford F-150's radiator with RIVAL 4x4 — engineered tough, built light, made for Australia. Order now!
