Aluminium 5-Plate Bash Set - GWM Tank 300
Underbody Coverage: 5-Plate Coverage from Radiator to Fuel Tank — Check Exact Vehicle Fitment
RIVAL installation manual for this plate or set
This set contains five plates covering engine, radiator, transmission, transfer case and fuel tank, with the mounting hardware and instructions listed below. Use the linked component installation sheets to check your exact vehicle and the kit before ordering.
✓ Underbody Coverage
- ✓ 5-Plate Underbody Protection System
- ✓ High-Strength 6mm Aluminium Alloy
- ✓ Vehicle-Specific Kit — Confirm Your Application
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Plate Design
- ✓ Install Using the Exact RIVAL Instructions
- ✓ Five-Plate Bundle
What's Protected
Additional underbody coverage for five plates covering engine, radiator, transmission, transfer case and fuel tank. Skid plates cannot guarantee protection against every impact or prevent all component damage.
Key Features
-
Material: 6mm high-strength aluminium alloy
-
Thickness: 6mm
-
Finish: Corrosion-resistant powder coat
-
Mounting: Direct bolt-on to factory mounting points
-
Number of Plates: 5 (Engine + Radiator + Transmission + Transfer Case + Fuel Tank)
-
Fitment: Check the exact model, engine and transmission against the Compatibility section and linked manual.
Weight and Vehicle Loading
Installed mass for this exact set has not been independently established. Do not use catalogue or shipping weight as proof of installed mass. Check the completed vehicle against its permitted loads; no fuel-economy, payload or GVM improvement is promised.
What's Included
- ✓ 1x Engine Bash Plate
- ✓ 1x Radiator Bash Plate
- ✓ 1x Transmission Bash Plate
- ✓ 1x Transfer Case Bash Plate
- ✓ 1x Fuel Tank Bash Plate
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ All Necessary Bolts & Fasteners
- ✓ Installation Instructions
Installation
Read each component sheet before fitting the set. The instructions specify staged mounting and tightening, component-specific brackets or insert nuts, and torque values. Pneumatic tools are prohibited. Installation time and equipment depend on the complete vehicle and kit; arrange professional fitting if required.
Care and Inspection
Inspect the plates, brackets and fasteners after fitting and after an impact. Follow the RIVAL instructions and seek qualified inspection if any part is damaged.
Use and Maintenance
Use only on a confirmed vehicle application and within the vehicle manufacturer's operating limits. Inspect the plate, brackets and fasteners regularly and after an impact. Do not ignore damage or loose fittings.
Compatibility
The five-sheet manual supplied for this set identifies Tank 300 2.0, automatic, 4WD, from 2023 on every component. Tank 500 appears on the radiator, engine and gearbox sheets only; it is not listed on the transfer-case or fuel-tank sheets. Those first three sheets do not establish complete five-plate-set fitment for Tank 500.
The manuals do not state fuel type or hybrid compatibility. Earlier model years and other powertrains need a specific fitment check; they are not confirmed by these sheets.
Check Your Complete Kit
Confirm the vehicle and all five plates before ordering. Contact RIVAL for a fitment check.
