Description
Aluminium Bash Plate Set — Engine, Radiator & Transmission | GWM Tank 300/500 (2021–Present) 4WD
Combined Weight: 19 kg (approx.)
For Tank 300 and Tank 500 owners looking for practical, essential underbody protection without going the full five-plate route, this three-plate RIVAL 4x4 set covers the trio of components that are most commonly damaged during off-road driving. The engine, radiator and transmission collectively represent the most expensive and most vulnerable parts beneath your Tank, and protecting them is the single smartest modification you can make before hitting the trails. Engineered from 6mm aluminium to fit the Tank platform precisely, this set delivers meaningful protection at a weight you'll barely notice.
- ✓ Complete Underbody Protection — Engine, Radiator & Transmission Coverage
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit for GWM Tank 300/500 (2021–Present)
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle — Save vs Buying Individually
What's Protected
- Engine Bash Plate — The 2.0L turbo petrol engine in your Tank is the most critical component to protect. A rock strike to the oil sump can crack the casing, drain oil in seconds and destroy the engine within minutes. This plate provides complete lower engine coverage, standing between your powerplant and the relentless hazards beneath every off-road track.
- Radiator Bash Plate — Without a functioning radiator, your engine overheats and shuts down. The radiator sits forward and low, directly in the path of gravel spray, stone strikes and airborne debris from unsealed roads. This plate forms a solid 6mm aluminium shield across the full radiator area, preventing damage that could leave you stranded with a boiling engine.
- Transmission Bash Plate — The automatic gearbox extends behind the engine, vulnerable to trail debris and underbody impacts. A cracked transmission housing or damaged fluid lines means losing drive and facing a substantial repair bill. This plate extends protection seamlessly from the engine plate rearward, ensuring continuous coverage across the front drivetrain zone.
Key Features
- Material: 6mm high-strength aluminium alloy
- Thickness: 6mm
- Combined Weight: Approx. 19 kg
- Finish: Textured matte black powder coat
- Mounting: Bolt-on to factory mounting points — no drilling or permanent modification
- Number of Plates: 3 (Engine + Radiator + Transmission)
- Fitment: GWM Tank 300 (2021–Present), GWM Tank 500 (2021–Present) — 4WD variants
Why Choose Aluminium Over Steel?
- Weight Savings: Three plates at approximately 19 kg is a barely noticeable addition to the Tank's kerb weight. Fuel economy, handling and ride quality remain unaffected.
- Corrosion Resistance: Aluminium won't rust. Whether your Tank lives by the coast, works in tropical conditions or explores dusty outback roads, these plates maintain their structural integrity without maintenance.
- Energy Management: Aluminium deforms progressively on impact, absorbing energy and reducing the forces transmitted to chassis mounts and the components behind each plate.
- Practical Investment: Three plates covering the three most critical components represents excellent value — protecting what matters most without over-capitalising on protection you may not need.
What's Included
- ✓ 1 x Aluminium Engine Bash Plate
- ✓ 1 x Aluminium Radiator Bash Plate
- ✓ 1 x Aluminium Transmission Bash Plate
- ✓ Complete Mounting Hardware & Bolts
- ✓ Step-by-Step Installation Instructions
Installation
- Difficulty: Easy — a quick and straightforward bolt-on job
- Requirements: Standard socket set, jack and jack stands (or vehicle hoist)
- Bolt-On Design: Three plates, factory mounting points, no drilling or modification required
- Time: All three plates can be fitted in under an hour for a seamless, aligned installation
Built for Australian Conditions
The Tank 300 and Tank 500 are earning their stripes on Australian tracks, and RIVAL 4x4 is here to make sure they survive the experience. The sharp rocks hiding under bulldust on outback roads, the corrugated gravel that shakes underbody components relentlessly, the submerged hazards in creek crossings, and the corrosive combination of coastal salt and tropical humidity — these are the realities of Australian driving. RIVAL's 6mm aluminium plates are engineered to handle every one of them, protecting your Tank's vital systems through the toughest conditions.
Perfect For
- Touring: Weekend trips and longer adventures on gravel roads and outback tracks
- Coastal Driving: Beach access, coastal roads and salt-air environments
- Recreational Off-Road: State forests, national parks and 4WD club runs
- Daily Protection: Potholes, speed bumps, gravel roads and everyday hazards
- Smart First Modification: The essential upgrade before your first serious off-road trip
Compatibility
- GWM Tank 300 (2021–Present) — 4WD variants
- GWM Tank 500 (2021–Present) — 4WD variants
- Engine: 2.0L Turbocharged Petrol
Why RIVAL 4x4?
- Australian-Based Operations & Support: Local team providing dedicated support for Australian Tank owners
- Globally Engineered. Locally Proven: Designed with precision engineering tools and tested on Australian tracks
- High-Strength Aluminium Construction: 6mm alloy plates — the right balance of strength and weight
- Fast Australia-Wide Dispatch: Shipped promptly from Australian warehouses
- National Dealer & Installation Network: Authorised RIVAL 4x4 installers for professional fitting
The essential three-plate starter pack for your Tank — protect the engine, radiator and transmission before your next adventure. Order now!
