GWM Tank 300/500 (2021–Present) — Aluminium Bash Plate Set — Engine & Radiator
Front-End Underbody Protection: Engine & Radiator Bash Plates — 4WD Petrol Only
Installation Manual
Combined Weight: 9.5 kg
Every serious off-road build starts with protecting the basics, and for the GWM Tank 300 and Tank 500, that means shielding the engine and radiator from the inevitable rock strikes that come with exploring Australia's back roads. This RIVAL 4x4 Aluminium Bash Plate Set weighs a mere 9.5 kg yet delivers robust 6mm aluminium protection to the two components most likely to leave you stranded if damaged. It's the perfect starting point for Tank owners who want essential protection without complexity — and you can always add more plates to the set later.
✓ Complete Underbody Protection
- ✓ Engine & Radiator Coverage
- ✓ High-Strength 6mm Aluminium Alloy
- ✓ Precision Fit for Tank 300 & Tank 500
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle
What's Protected
-
Engine Bash Plate — The oil pan and engine sump are the lowest-hanging components beneath your Tank. A single rock strike can crack the sump, resulting in rapid oil loss and potential engine seizure. In remote Australia, that means an expensive recovery operation. This plate provides comprehensive coverage across the entire engine underside, deflecting impacts and distributing force safely.
-
Radiator Bash Plate — The radiator is your cooling system's most vulnerable point, positioned at the front where every stone, stick, and piece of trail debris takes aim. A punctured radiator means instant overheating and a vehicle that's going nowhere. This plate acts as the first line of defence, keeping your cooling system intact through the worst trails.
Key Features
-
Material: 6mm thick aluminium alloy
-
Thickness: 6mm
-
Combined Weight: 9.5 kg
-
Finish: Corrosion-resistant powder coat
-
Mounting: Direct bolt-on to factory mounting points
-
Number of Plates: 2 (Engine + Radiator)
-
Fitment: GWM Tank 300 2.0L AT 4WD / Tank 500 3.0L AT 4WD (2021–Present), Petrol only
Why Choose Aluminium Over Steel?
-
Ultra-Lightweight: At just 9.5 kg for two plates, the weight impact on your vehicle is negligible — you'll barely notice they're there until they save your engine.
-
Corrosion Resistance: Aluminium won't rust, making it perfect for water crossings, coastal tracks, and Australia's humid tropical zones.
-
Impact Absorption: Aluminium's controlled flex absorbs and spreads impact energy, protecting mounting points and the vehicle's structure from concentrated forces.
-
Modern Materials: 6mm aluminium alloy provides serious protection at a fraction of the weight of steel — ideal for vehicles where every kilogram counts.
What's Included
- ✓ 1x Engine Bash Plate
- ✓ 1x Radiator Bash Plate
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ All Necessary Bolts & Fasteners
- ✓ Installation Instructions
Installation
-
Difficulty: Easy — beginner-friendly
-
Requirements: Basic hand tools, vehicle ramps or jack stands
-
Bolt-On Design: Both plates mount to factory points — no drilling, cutting, or permanent modifications
-
Recommendation: Install both plates in one session — allow approximately 45 minutes to 1 hour
Built for Australian Conditions
Tank 300 and 500 owners are taking their vehicles to places that demand real underbody protection. From the rocky firebreaks of the Blue Mountains to the sand tracks of Fraser Island, from the gravel roads of Tasmania's west coast to the rutted trails of the Kimberley, RIVAL 4x4 bash plates handle it all. The corrosion-resistant powder coat stands up to salt spray, tropical downpours, and the fine red-dust that works its way into everything. Lightweight aluminium construction ensures your Tank retains its agility on tight bush tracks.
Perfect For
-
Weekend Explorers: Essential front-end protection for bush tracks and national park roads
-
Coastal Drivers: Rust-proof aluminium for beach and coastal driving conditions
-
Tradies & Daily Drivers: Protect against road debris, speed bumps, and construction site hazards
-
Off-Road Beginners: The ideal starting point for building your Tank's underbody protection
-
Everyday Assurance: Peace of mind on every road, sealed or unsealed
Compatibility
Precision-engineered for:
-
GWM Tank 300 (2021–Present) — 2.0L Turbo Petrol, AT, 4WD
-
GWM Tank 500 (2021–Present) — 3.0L AT, 4WD
- Petrol models only
Why RIVAL 4x4?
-
Australian-Based Operations & Support: Local team, local knowledge, genuine Australian support
-
Globally Engineered. Locally Proven: Precision CAD design tested on real Australian terrain
-
High-Strength Aluminium Construction: Premium 6mm alloy — light, tough, and corrosion-proof
-
Fast Australia-Wide Dispatch: Quick shipping from our Australian warehouse
-
National Dealer & Installation Network: Professional fitting through authorised installers nationwide
The Essential Starting Point for Underbody Protection
Protect the two components that matter most. Lightweight, strong, and built to last. Order now!
