Description
Aluminium Bash Plate Set — Engine & Radiator | GWM Tank 300/500 (2021–Present) 4WD
Combined Weight: 11 kg (approx.)
Every off-road journey starts with a functioning engine and a working cooling system — which is exactly why this RIVAL 4x4 two-plate set focuses on the two most critical and most commonly damaged components underneath the GWM Tank 300 and Tank 500. The engine sump and radiator sit lowest and take the most direct hits from rocks, gravel and trail debris, and replacing either one costs significantly more than this entire protection set. At approximately 11 kg, these precision-fit 6mm aluminium plates add virtually no weight while delivering genuine peace of mind on every trip, from the daily commute to the weekend trail ride.
- ✓ Complete Underbody Protection — Engine & Radiator Coverage
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit for GWM Tank 300/500 (2021–Present)
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Optimal Airflow
- ✓ Bolt-On Installation — No Drilling Required
- ✓ Cost-Effective Bundle — Save vs Buying Individually
What's Protected
- Engine Bash Plate — The Tank's 2.0L turbo petrol engine is the most valuable and most vulnerable component beneath the vehicle. The oil sump protrudes below the engine block, fully exposed to rocks, stumps and ruts on off-road tracks. A single hard strike can crack the sump, drain the oil and seize the engine in minutes. This plate provides full-coverage protection for the sump and lower engine block, deflecting impacts and distributing force across its 6mm aluminium surface.
- Radiator Bash Plate — The radiator keeps your engine within safe operating temperatures — a critical function, especially in the Australian heat. Sitting at the front of the vehicle, it's constantly bombarded by stones, gravel and debris from unsealed roads. A punctured radiator core drains coolant rapidly, leading to engine overheating and potential damage. This plate provides a robust aluminium barrier across the entire radiator area, ensuring your cooling system stays intact.
Key Features
- Material: 6mm high-strength aluminium alloy
- Thickness: 6mm
- Combined Weight: Approx. 11 kg
- Finish: Textured matte black powder coat
- Mounting: Bolt-on to factory mounting points — no drilling or permanent modification
- Number of Plates: 2 (Engine + Radiator)
- Fitment: GWM Tank 300 (2021–Present), GWM Tank 500 (2021–Present) — 4WD variants
Why Choose Aluminium Over Steel?
- Weight Savings: At roughly 11 kg for two full-size plates, aluminium adds virtually nothing to the Tank's kerb weight. Fuel economy, suspension performance and handling remain unchanged.
- Corrosion Resistance: Aluminium doesn't rust. Whether your Tank lives near the ocean, works in the tropics or explores dusty outback roads, these plates stay corrosion-free for the life of the vehicle.
- Energy Management: Aluminium absorbs and redistributes impact energy through controlled flex, protecting the engine and radiator from the full force of rock strikes and underbody impacts.
- Accessible Entry Point: Two plates at minimal weight and competitive cost make this the most accessible way to start protecting your Tank's underbody. Upgrade to the three, four or five-plate set later if needed.
What's Included
- ✓ 1 x Aluminium Engine Bash Plate
- ✓ 1 x Aluminium Radiator Bash Plate
- ✓ Complete Mounting Hardware & Bolts
- ✓ Step-by-Step Installation Instructions
Installation
- Difficulty: Easy — one of the simplest bash plate installs available
- Requirements: Standard socket set, jack and jack stands (or vehicle hoist)
- Bolt-On Design: Two plates, factory mounting points, no drilling or permanent modification
- Time: Both plates can be installed in well under an hour
Built for Australian Conditions
Australian roads and tracks don't care what badge is on the front of your vehicle — they attack every exposed underbody component equally. From the gravel highways of rural New South Wales to the rock-strewn trails of the Flinders Ranges, from beach driving on Fraser Island to the corrugated red-dirt of the Tanami — your Tank's engine and radiator face constant risk. RIVAL 4x4's aluminium plates are built specifically for this punishment, providing durable, corrosion-resistant protection that handles every challenge the Australian landscape presents.
Perfect For
- Weekend Adventures: Gravel roads, fire trails, national parks and state forests
- Coastal Driving: Beach access tracks and salt-air environments
- Daily Driving: Potholes, speed bumps, road debris and gravel roads
- First-Time Off-Roaders: Essential starter protection before venturing off the bitumen
- Budget-Conscious Protection: Maximum value for the two most critical components
Compatibility
- GWM Tank 300 (2021–Present) — 4WD variants
- GWM Tank 500 (2021–Present) — 4WD variants
- Engine: 2.0L Turbocharged Petrol
Why RIVAL 4x4?
- Australian-Based Operations & Support: Local team ready to help Australian Tank owners with advice and warranty support
- Globally Engineered. Locally Proven: Precision design validated on the tracks Australian drivers actually use
- High-Strength Aluminium Construction: 6mm alloy plates — lightweight, durable and built to perform
- Fast Australia-Wide Dispatch: Fast shipping from Australian warehouses to your door
- National Dealer & Installation Network: Professional fitting through authorised RIVAL 4x4 dealers across Australia
Protect the essentials first — engine and radiator armour that lets you explore with confidence from day one. Order now!
