VW Amarok (2010–2016) 4x4 Transmission Bash Plate — Aluminium
Gearbox & Transmission Housing Protection
Installation Manual - Click here
Weight: 17.5 kg
When you're grinding through the vast outback of Queensland, where bulldust hides sharp rocks and corrugations shake every bolt loose, your VW Amarok's transmission housing sits exposed beneath the vehicle — a precision-machined aluminium casing that's both critical to your drivetrain and vulnerable to rock strikes. A cracked gearbox housing means no drive, no movement, and no option but an expensive recovery. The RIVAL 4x4 Transmission Bash Plate for the VW Amarok (2010–2016) delivers precision-engineered protection for your gearbox housing — a precision component that's both expensive to replace and vulnerable to rock strikes. Crafted from deep-stamped 6mm high-strength aluminium alloy, this substantial 17.5 kg plate provides comprehensive coverage for the entire transmission housing.
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit — Vehicle-Specific Design for VW Amarok (2010–2016)
- ✓ Complete Gearbox Protection
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Airflow & Debris Drainage
- ✓ Bolt-On Installation — No Drilling Required
Key Features
-
Material: 6mm Deep-Stamped High-Strength Aluminium Alloy (5251 grade)
-
Thickness: 6mm
-
Weight: 17.5 kg
-
Finish: Textured Matte Black Polymer Powder Coat
-
Mounting: Direct bolt-on to factory mounting points — no drilling or chassis modification required
-
Fitment: VW Amarok (2010–2016) 4x4 models
Why Choose Aluminium Over Steel?
-
Weight Savings: Even at 17.5 kg, aluminium is approximately 40% lighter than an equivalent steel plate would be, preserving your Amarok's payload capacity for touring gear and tools.
-
Corrosion Resistance: Unlike steel, aluminium naturally forms a protective oxide layer. Combined with powder coating, your bash plate won't rust — even after years of salt-air exposure, water crossings, and red-dust trails.
-
Energy Absorption: Aluminium's natural flex absorbs and distributes impact energy across the plate rather than transferring sharp jolts directly to the transmission housing and crossmember.
-
Modern Vehicle Design: The Amarok's European engineering means tight GVM margins. Aluminium protection adds security without tipping you over weight limits that affect warranty and insurance.
What's Included
- ✓ 1x RIVAL Transmission Bash Plate for VW Amarok (2010–2016)
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ High-Tensile Bolts & Fasteners
- ✓ Installation Instructions
Installation
-
Difficulty: Easy — suitable for home mechanics with basic tools
-
Requirements: Standard socket set, jack & stands or vehicle hoist
-
Bolt-On Design: Mounts directly to factory mounting points with no drilling, cutting, or permanent modification. Fully reversible installation that won't affect your vehicle's warranty.
Built for Australian Conditions
The VW Amarok earned its reputation in Australia as a ute that combines European refinement with genuine off-road capability. But Australia's terrain doesn't care about refinement — the corrugated roads of outback Queensland, the rocky creek beds of the Kimberley, and the sharp gibber stones of the Strzelecki Track all target the transmission housing sitting exposed beneath your Amarok.
RIVAL bash plates are engineered for these exact conditions. The deep-stamped construction creates integrated stiffening ribs that provide up to two times the impact resistance of flat-plate designs. The powder coat finish resists UV degradation, salt corrosion, and the abrasive red dust that penetrates everything.
Perfect For
- Long-distance outback touring — Cape York, Gibb River Road, Simpson Desert
- Coastal driving where salt air accelerates corrosion on exposed drivetrain components
- Tradies and fleet vehicles operating on construction sites, farms, and mining roads
- Serious off-road adventures including rock crawling, river crossings, and rutted tracks
- Daily driving with peace of mind knowing your transmission is shielded from road debris and hazards
Compatibility
Vehicle: VW Amarok (2010–2016)
Engine Options: 2.0L TDI (all variants)
Variants: All cab configurations and trim levels for 4x4 models. Verify fitment with your vehicle's build date and chassis number if unsure.
Why RIVAL 4x4?
-
Australian-Based Operations & Support: Local team, local warranty, local knowledge. Phone and email support from people who actually drive these tracks.
-
Globally Engineered. Locally Proven: Designed using advanced CAD/CAM and FEA stress analysis, then tested on Australia's toughest tracks to ensure real-world performance.
-
High-Strength Aluminium Construction: Premium 5251-grade alloy, deep-stamped for maximum rigidity, finished with durable polymer powder coat.
-
Fast Australia-Wide Dispatch: Stocked locally for rapid delivery to metro, regional, and remote addresses across Australia.
-
National Dealer & Installation Network: Professional fitting available through RIVAL's network of authorised dealers and 4x4 workshops across every state and territory.
Your Amarok's gearbox is precision-engineered — protect it with precision-engineered armour. RIVAL 4x4: built for Australian conditions. Order now!
