Aluminium Lower Control Arms Bash Plate — Toyota Hilux (2015–2025)
Front Lower Control Arm Protection
Installation Manual - Click here
Weight: 4.8 kg
When you're tracing the historic Holland Track, where prospectors once travelled and fallen mulga branches still litter the trail, your Toyota Hilux's lower control arms are the unsung heroes of your suspension system — and among its most exposed components. Sitting at perfect rock-strike height, these arms absorb lateral impacts that can bend geometry, damage bushings, and compromise your steering alignment. The RIVAL 4x4 Lower Control Arms Bash Plate for the Hilux (2015–2025) delivers targeted protection for your front lower control arms — the suspension components most exposed to side impacts from rocks, ruts, and trail debris. At 4.8 kg of deep-stamped 6mm aluminium, this is lightweight insurance for components that are expensive and time-consuming to replace.
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit — Vehicle-Specific Design for Toyota Hilux (2015–2025)
- ✓ Front Suspension Component Coverage
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Airflow & Debris Drainage
- ✓ Bolt-On Installation — No Drilling Required
Key Features
-
Material: 6mm Deep-Stamped High-Strength Aluminium Alloy (5251 grade)
-
Thickness: 6mm
-
Weight: 4.8 kg
-
Finish: Textured Matte Black Polymer Powder Coat
-
Mounting: Direct bolt-on to factory mounting points — no drilling or chassis modification required
-
Fitment: Toyota Hilux (2015–2025)
Why Choose Aluminium Over Steel?
-
Weight Savings: Aluminium is approximately 40% lighter than steel, minimising unsprung mass for better ride quality and preserved handling — especially important for suspension components.
-
Corrosion Resistance: Unlike steel, aluminium naturally forms a protective oxide layer. Combined with powder coating, your bash plate won't rust — critical for parts constantly exposed to water, mud, and road grime.
-
Energy Absorption: Aluminium's natural flex absorbs and distributes impact energy rather than transmitting jolts to control arm bushings and ball joints.
-
Modern Vehicle Design: The Hilux's independent front suspension performs best when unsprung weight is minimised. Aluminium protection complements rather than compromises factory engineering.
What's Included
- ✓ 1x RIVAL Lower Control Arms Bash Plate (pair) for Toyota Hilux
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ High-Tensile Bolts & Fasteners
- ✓ Installation Instructions
Installation
-
Difficulty: Easy — suitable for home mechanics with basic tools
-
Requirements: Standard socket set, jack & stands or vehicle hoist
-
Bolt-On Design: Mounts directly to factory mounting points with no drilling, cutting, or permanent modification. Fully reversible installation.
Built for Australian Conditions
The Toyota Hilux is Australia's best-selling vehicle — and for good reason. These utes work harder and travel further than almost anything else on Australian roads. From mine sites to school runs, from Cape York expeditions to weekend beach trips, the Hilux does it all. And its lower control arms take punishment from every surface it encounters.
RIVAL bash plates are engineered for this demanding life. Deep-stamped construction creates stiffening ribs for superior impact resistance. Powder coat finish resists UV, salt, and the abrasive conditions Australian Hiluxes face daily.
Perfect For
- Long-distance outback touring — Cape York, Gibb River Road, Simpson Desert
- Coastal driving where salt air and water threaten suspension components
- Tradies and fleet vehicles operating on construction sites, farms, and mining roads
- Serious off-road adventures including rock crawling, river crossings, and rutted tracks
- Daily driving with peace of mind knowing your lower control arms are armoured
Compatibility
Vehicle: Toyota Hilux (2015–2025)
Engine Options: 2.4L Turbo Diesel (2GD-FTV), 2.8L Turbo Diesel (1GD-FTV), 4.0L V6 Petrol
Variants: All cab configurations and trim levels. Verify fitment with your vehicle's build date and chassis number if unsure.
Why RIVAL 4x4?
-
Australian-Based Operations & Support: Local team, local warranty, local knowledge. Phone and email support from people who actually drive these tracks.
-
Globally Engineered. Locally Proven: Designed using advanced CAD/CAM and FEA stress analysis, then tested on Australia's toughest tracks to ensure real-world performance.
-
High-Strength Aluminium Construction: Premium 5251-grade alloy, deep-stamped for maximum rigidity, finished with durable polymer powder coat.
-
Fast Australia-Wide Dispatch: Stocked locally for rapid delivery to metro, regional, and remote addresses across Australia.
-
National Dealer & Installation Network: Professional fitting available through RIVAL's network of authorised dealers and 4x4 workshops across every state and territory.
Australia's best-selling vehicle deserves Australia's best protection. Shield your Hilux's lower control arms with RIVAL 4x4. Order now!