Aluminium Lower Control Arm Bash Plate — Ford Ranger PX1/PX2/PX3 (2012–2022)
Front Lower Control Arm Protection
Installation Manual - Click here
Weight: 4.5 kg
When you're tackling the remote Hay River Track, where deep bulldust and hidden washouts can strike at highway speeds, your Ford Ranger's lower control arms are among the most exposed components on the chassis. Sitting at rock height on either side of the vehicle, these critical suspension components take the brunt of side impacts from rocks, rut walls, and embedded trail debris. The RIVAL 4x4 Lower Control Arm Bash Plate for the Ford Ranger PX1/PX2/PX3 delivers targeted protection for your front lower control arms — the suspension components most exposed to side impacts from rocks, ruts, and trail debris. At just 4.5 kg of deep-stamped 6mm aluminium, this plate provides disproportionate protection for its weight.
- ✓ High-Strength 6mm Aluminium Alloy Construction
- ✓ Precision Fit — Vehicle-Specific Design for Ford Ranger PX1/PX2/PX3
- ✓ Front Suspension Component Coverage
- ✓ Corrosion-Resistant Powder Coat Finish
- ✓ Ventilated Design for Airflow & Debris Drainage
- ✓ Bolt-On Installation — No Drilling Required
Key Features
-
Material: 6mm Deep-Stamped High-Strength Aluminium Alloy (5251 grade)
-
Thickness: 6mm
-
Weight: 4.5 kg
-
Finish: Textured Matte Black Polymer Powder Coat
-
Mounting: Direct bolt-on to factory mounting points — no drilling or chassis modification required
-
Fitment: Ford Ranger PX1/PX2/PX3 (2012–2022)
Why Choose Aluminium Over Steel?
-
Weight Savings: Aluminium is approximately 40% lighter than steel, minimising unsprung mass for better ride quality and preserved handling characteristics.
-
Corrosion Resistance: Unlike steel, aluminium naturally forms a protective oxide layer. Combined with powder coating, your bash plate won't rust — critical for components constantly exposed to water, mud, and road salt.
-
Energy Absorption: Aluminium's natural flex absorbs and distributes impact energy rather than transmitting harsh jolts to control arm bushings and ball joints.
-
Modern Vehicle Design: The Ranger's independent front suspension demands lightweight protection that doesn't compromise the factory ride and handling setup.
What's Included
- ✓ 1x RIVAL Lower Control Arm Bash Plate (pair) for Ford Ranger PX
- ✓ Complete Mounting Hardware & Fitting Kit
- ✓ High-Tensile Bolts & Fasteners
- ✓ Installation Instructions
Installation
-
Difficulty: Easy — suitable for home mechanics with basic tools
-
Requirements: Standard socket set, jack & stands or vehicle hoist
-
Bolt-On Design: Mounts directly to factory mounting points with no drilling, cutting, or permanent modification. Fully reversible installation.
Built for Australian Conditions
The Ford Ranger PX series is one of Australia's most popular utes — and one of the most modified. Whether yours is a work truck, a touring rig, or a daily driver that sees the odd fire trail, the lower control arms are always exposed to the Australian landscape. From Victoria's granite-strewn High Country to the sharp laterite of Kimberley tracks, protection at this level prevents expensive alignment and suspension repairs.
RIVAL bash plates are engineered for these conditions. Deep-stamped construction creates stiffening ribs for superior impact resistance. Powder coat finish resists UV, salt, and abrasive dust.
Perfect For
- Long-distance outback touring — Cape York, Gibb River Road, Simpson Desert
- Coastal driving where salt air and water threaten suspension components
- Tradies and fleet vehicles on construction sites, farms, and mining roads
- Serious off-road adventures including rock crawling, river crossings, and rutted tracks
- Daily driving with peace of mind knowing your lower control arms are shielded
Compatibility
Vehicle: Ford Ranger PX1/PX2/PX3 (2012–2022)
Engine Options: 2.2L TDCi, 3.2L TDCi 5-Cylinder Turbo Diesel, 2.0L Bi-Turbo Diesel (PX3)
Variants: All cab configurations and trim levels. Verify fitment with your vehicle's build date and chassis number if unsure.
Why RIVAL 4x4?
-
Australian-Based Operations & Support: Local team, local warranty, local knowledge. Phone and email support from people who actually drive these tracks.
-
Globally Engineered. Locally Proven: Designed using advanced CAD/CAM and FEA stress analysis, then tested on Australia's toughest tracks to ensure real-world performance.
-
High-Strength Aluminium Construction: Premium 5251-grade alloy, deep-stamped for maximum rigidity, finished with durable polymer powder coat.
-
Fast Australia-Wide Dispatch: Stocked locally for rapid delivery to metro, regional, and remote addresses across Australia.
-
National Dealer & Installation Network: Professional fitting available through RIVAL's network of authorised dealers and 4x4 workshops across every state and territory.
Your Ranger's suspension geometry depends on healthy control arms. Protect them with RIVAL 4x4 — 4.5 kg of aluminium armour that prevents thousands in repairs. Order now!
